Skip to main content

Soundcraft and the Automator

Learn how to use Soundcraft UI with the Cuez Automator

What is Soundcraft UI?

The Soundcraft UI series consists of digital mixers that offer wireless control and compatibility with various devices, allowing for remote mixing and recording. They feature multiple inputs, built-in effects, and advanced signal processing capabilities.
​
For more information, please visit the Soundcraft website.
​

Adding a Soundcraft 'device' to the Automator

In the top right corner of the Automator, we see 'Devices' - this can be either in red or green depending on the status of the configured devices. Click it and select 'Add device'.
Next, select 'Soundcraft' from the 'Device type' dropdown list, then give it a name.

Once the Soundcraft device is selected and given a name, we will see all the fields needed to configure it so it can be used with the Automator.

Basic device configuration

Enter the ‘Host name’ (the IP address of the mixer) and the ‘Port’. Once these settings have been entered, the device should show as ‘online’ (green) in the top right corner.

Configuring actions

The next step is to configure each Item and Block configuration with the (set of) functions you want to perform on the Soundcraft when triggering the Item or Block - more on that in this article.

Available functions

Set volume

The ‘Set Volume’ function sets the volume of a specified channel on the Soundcraft UI mixer. Configure this function with the following arguments:

  • Channel — the channel to adjust.

  • Volume — the desired volume level.

Did this answer your question?